Small-engine carburetors are matched by intake bore size, mounting style, choke type and throttle-cable setup. Model names such as PZ19, PZ20, PZ22 and PD24 usually point to the bore size in millimeters, but always measure your old carburetor or check your part number before ordering.
| Name | Typical bore | How to confirm |
|---|---|---|
| PZ19 | about 19 mm | Measure the intake bore and the manifold bolt spacing. |
| PZ20 | about 20 mm | Measure the bore; check manual or cable choke. |
| PZ22 | about 22 mm | Check choke side (left or right) and cable layout. |
| PD24 | about 24 mm | Check the intake boot diameter and choke type. |
| Intake bore and mount | Measure the bore and the bolt spacing on the intake manifold, or the boot diameter for clamp-on carbs. |
|---|---|
| Choke type | Manual (lever or cable) or electric auto-choke. GY6 scooters often use an electric choke with a wire to the wiring harness. |
| Throttle cable | Top-entry or side-entry cable, and the cable end style. |
| Fuel and vacuum lines | Count the nipples and note where they point. |
A rebuild kit (gaskets, needle, jets, O-rings) fixes a carburetor that is dirty or leaking but not damaged. A new carburetor is faster when the body is cracked, threads are stripped or the slide is worn.
The main jet controls fuel at high throttle. Stock jetting is the safe starting point. Change jets only after an intake or exhaust change, and in small steps.
Many running problems are not the carburetor. Check for old fuel, a clogged fuel filter, a cracked fuel line or a stuck petcock before replacing it.
The number usually refers to the bore size in millimeters. Measure your old carburetor and the intake before switching sizes.
Not always. Match the bore, mounting, choke type and cable setup to your engine. Check your part number / measure.
Rebuild if the body is undamaged and it is only dirty or leaking. Replace it if it is cracked, stripped or badly worn.
Check fuel, the fuel filter, fuel lines, the petcock, the air filter, vacuum leaks at the intake and the spark plug.
Shop by model: GY6 150cc Carburetors and Carb Parts, GY6 50cc / 139QMB Scooter Carburetors, Carburetors for 196-212cc OHV Engines - Fits PRD 212 / GX200.
Not sure? Email sunmotorbike@gmail.com with your make, model, year, the part number on the old part and a photo, and we will confirm the fit before you buy.
Shop: Carburetors, Carburetor rebuild kits, Carburetor Rebuild Kit for 150cc Off-Road Go-Karts, Fuel filters. Related: Go-Kart Parts Buying Guide, Scooter Parts Buying Guide, ATV Parts Buying Guide, All guides.
US shipping is free on orders of $50 or more and a flat $8.95 under $50. Canada ships at flat rates, and we ship worldwide from Miami. All sales final. No returns accepted. If we ship the wrong part or it arrives damaged or defective, contact us within 7 days and we'll replace it. SunMotorbike is an online-only store (no walk-in counter); orders ship from Miami, Florida. Details: shipping, returns, FAQ, contact. SunMotorbike, Miami, Florida. Replacement parts only.