Go-karts and mini bikes mostly use #35, #40, #41 or 420 roller chain. The chain and every sprocket it runs on must share the same pitch, so identify the chain size first, then match tooth count and bore. Replace a worn chain and sprockets together.
| Size | Pitch | Notes |
|---|---|---|
| #35 | 3/8 in | Lighter chain, common on small karts and some torque converters. |
| #40 | 1/2 in | Standard roller chain, heavier than #41. |
| #41 | 1/2 in | Lighter-duty 1/2 in chain, narrower rollers than #40. Very common on mini bikes. |
| 420 | 1/2 in | Motorcycle-style 1/2 in chain used on many pit bikes and karts. |
| Pitch | Must match the chain. A #35 sprocket will not run a #40/41 chain. |
|---|---|
| Tooth count | Stamped on most sprockets, or count the teeth. |
| Bore and keyway | The shaft size (for example 5/8 in or 3/4 in) and key width must match your clutch or axle. |
| Mounting | Bolt-on sprockets: count bolts and measure the bolt circle. Check your part number / measure. |
Measure from the center of one pin to the center of the next. 3/8 in means #35; 1/2 in means #40, #41 or 420. Many chains also have the size stamped on the side plates. To find length, count the links, or buy a longer chain and shorten it with a chain breaker and a master link.
Gear ratio = rear (driven) sprocket teeth / front (drive) sprocket teeth. A bigger ratio gives more low-end pull and less top speed; a smaller ratio does the reverse. Change one sprocket at a time and recheck chain length.
A centrifugal clutch has the drive sprocket on it. A torque converter has a driven pulley with its own output sprocket. Both list a chain size, so match that chain size when you replace parts.
All three are 1/2 in pitch. #41 is lighter with narrower rollers, #40 is heavier-duty, and 420 is a motorcycle-style chain. Check your sprocket's rated chain size before mixing them.
Read the number stamped on the side plates, or measure pin center to pin center: 3/8 in is #35, 1/2 in is #40/41/420.
Yes when the sprocket teeth look hooked or sharp. A new chain on worn sprockets wears out quickly.
Count the links on the old chain, including the master link. If you change sprocket sizes, wrap the chain around both sprockets to check.
Shop by model: Throttle, Sprocket and Drive Parts for 196-212cc OHV - Fits PRD 212 / GX200.
Not sure? Email sunmotorbike@gmail.com with your make, model, year, the part number on the old part and a photo, and we will confirm the fit before you buy.
Shop: Chains, Sprockets, Torque converters, Clutches. Related: Go-Kart Parts Buying Guide, Mini Bike Parts Buying Guide, All guides.
US shipping is free on orders of $50 or more and a flat $8.95 under $50. Canada ships at flat rates, and we ship worldwide from Miami. All sales final. No returns accepted. If we ship the wrong part or it arrives damaged or defective, contact us within 7 days and we'll replace it. SunMotorbike is an online-only store (no walk-in counter); orders ship from Miami, Florida. Details: shipping, returns, FAQ, contact. SunMotorbike, Miami, Florida. Replacement parts only.